Sharp AR-156 User Manual

Page 23

Advertising
background image

21

3

Special functions

TONER SAVE MODE

Press and hold down the exposure mode selector key for approximately 5 seconds.
The manual (

) indicator will go out and the photo (

) indicator will begin to blink.

The exposure indicator marked “5” will light up, indicating the standard toner mode is
active.

To enter the toner save mode, press the light (

) key.

The exposure indicator marked “1” will light up, indicating the toner save mode is
selected.

Press the exposure mode selector key twice. The photo (

) indicator will stop blinking

and the AUTO indicator will light up steadily. The toner save mode is now active.

To return to the standard mode, repeat the procedure but use the dark (

) key

to select exposure level “5” in step 3.

USER PROGRAMS (power save modes, auto clear
time, stream feeding mode)

The user programs allow the parameters of certain functions to be set, changed, or canceled
as desired.

Setting the power save modes, auto clear time, and stream feeding mode

Press and hold down the light (

) and dark (

) keys simultaneously for more than

5 seconds until all the alarm indicators (

,

,

and

) blink and “– –” appears in

the display.

Use the left copy quantity (

) key to select a user program number (1: auto clear

time, 2: preheat mode, 3: auto power shut-off timer, 4: stream feeding mode, 5: auto
power shut-off mode). The selected number will blink in the left side of the display.

Advertising