Sony MZ-R910 - Manual (Page 100)

100
MZ-R910.3-234-699-01(1)
To maintain the correct time
Once you set the clock, it will keep correct
time as long as the recorder is connected to a
power source, such as the rechargeable
battery, alkaline dry battery, or AC power
adaptor. However, if no power source is
connected, the clock setting will change back
to the factory setting after about 3 minutes.
When changing the rechargeable battery or
alkaline dry battery, make sure to do it within
3 minutes.
Notes
• Make sure the time is correctly set if you want
the time stamp to be accurately recorded for
an important recording.
• Under normal conditions, the clock may vary
by about plus or minus 2 minutes per month.
B Various ways of
playback
Searching for a specific track
or a position quickly (Quick
Search)
See the illustrations in Japanese text (page 34).
You can do two kinds of quick search.
• Index search — Searching quickly while
monitoring the track numbers or track
names.
• Time search — Searching quickly while
monitoring the elapsed time.
Selecting the search mode
The search mode can be selected only on
the remote control while the recorder is
stopped, playing, or play-paused. The
recorder is factory set to “Index”.
1 Press DISPLAY for 2 seconds or more.
2 Turn the control repeatedly until
“SEARCH” flashes in the display, and
then press x to enter.
3 Turn the control repeatedly until
“Index”(index search) or “Time”(time
search) flashes in the display, and then
press x to enter.
Searching for a specific track
while monitoring track numbers
or track names (Index Search)
To do an index search, set the search mode
to “Index” in advance.
On the recorder
1 Turn the jog dial until the desired track
appears in the display, and then press
the dial.
The selected track name appears in the
display and the recorder starts playing
by pressing the jog dial.
If the track has no name, the track
number appears in the display.
On the remote control
1 Press X while playing a disc.
2 Turn and hold the control until the
desired track number or track name
appears in the display.
3 Press X to cancel the pause.
Playback starts from the selected track.
Searching for a specific point
while monitoring the elapsed
time (Time Search)
To do a time search, set the search mode to
“Time” in advance.
On the recorder
1 Press X while playing a disc.
2 Keep pressing . or > until the
desired point appears in the display.
3 Press X to cancel the pause.
Playback starts from the selected point.
On the remote control
1 Press X while playing a disc.
2 Turn and hold the control until the
desired point appears in the display.
3 Press X to cancel the pause.
Playback starts from the selected point.
02.4.30, 11:34 AM 100