Sony MZ-R910 - Manual (Page 101)

101
Operating Instructions
MZ-R910.3-234-699-01(1)
Using the group function
(Group Mode)
See the illustrations in Japanese text (pages 35
to 36 ).
The recorder can operate various playback
with a disc which has group setting.
Listening to tracks in a specific
group (Group Mode Playback)
• Insert a disc with group settings.
On the recorder
1 Start playback.
2 Press GROUP for 2 seconds or more to
turn the group mode on.
Playback stops at the end of the last track
in the selected group.
For details on selecting another group, see
“Selecting and playing groups (Group Skip
Mode)” (this page).
On the remote control
1 Start playback.
2 Press DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until
“GROUP” flashes in the display, and
then press x to enter.
4 Turn the control repeatedly until
“GROUP ON” flashes in the display,
and then press x to turn the group
mode on.
To turn off the group function
• On the recorder
Press GROUP for 2 seconds or more again.
• On the remote control
Select “GROUP OFF” in step 4.
Note
In group mode, the recorder treats all tracks
without group settings as belonging to the last
group on the disc. The last group is indicated
in the display window on the recorder as
“Group – –.” Within a group, the tracks
appear in their order on the disc, not their
order within the group.
Selecting and playing groups
(Group Skip Mode)
Operations are possible regardless of whether
group mode is on or off. However, playback
on the recorder will differ, depending on
whether group mode is on or off.
•
When group mode is on:
Playback starts from the first track of the
selected group and ends with the last
track in the group.
• When group mode is off:
Playback starts from the first track of the
selected group and ends with the last
track on the disc.
• The following procedure is used when
group mode is on.
• Insert a disc with group settings.
On the recorder
1 Press GROUP slightly while playing.
“
” flashes in the display and the
group become selectable.
2 Within 5 seconds, turn the jog dial to
select your desired group, and then
press to enter.
The recorder starts playing from the first
track in the group.
On the remote control
1 While the recorder is playing, press and
hold PLAYMODE until “– – –” flashes in
the display.
The group skip mode turns on.
2 Within 5 seconds, turn the control
repeatedly to select your desired group.
Note
If no operation is performed within 5 seconds
after step 1, the group skip mode will be
canceled and you will not be able to perform
step 2 thereafter. To continue with step 1 at
this point, repeat from the beginning of the
procedure.
02.4.30, 11:34 AM 101