Sony MZ-R910 - Manual (Page 102)

102
MZ-R910.3-234-699-01(1)
Changing a play mode
See the illustrations in Japanese text (pages 37
to 39).
Settings can be stored to the Personal Disc
Memory.
Selecting a play mode
On the recorder
1 While the recorder is playing, press the
jog dial.
2 Turn the jog dial until “PLAY MODE”
flashes in the display, and then press to
enter.
3 Turn the jog dial to select the play mode,
and then press to enter.
play mode/indication
“Normal”/“(none)” (All the
tracks are played once)
m
“AllRepeat”/“ ” (All the
tracks are played repeatedly)
m
“1 Track”/“1” (A single track
is played)
m
“1 Repeat”/“ 1” (A single
track is played repeatedly)
m
“Shuffle”/“SHUF” (After
currently selected track finishes
playing, the remaining tracks
are played in random order)
m
“Shuf. Rep”/“ SHUF”(After
currently selected track finishes
playing, the remaining tracks
are played repeatedly in
random order)
m
“PGM”/“PGM” (Tracks are
played in the order that you
specified)
m
“PGMRepeat”/“ PGM” (tracks
are played repeatedly
in the order that you specified).
On the remote control
1 Press PLAYMODE during playback.
Each time you press this button, the play
mode changes as follows.
“(none)” (All the tracks are played
once)
m
“1 ” (A single track is played)
m
“SHUF”(After currently selected
track finishes playing, the
remaining tracks are played in
random order)
m
“PGM” (Tracks are played in the
order that you specified).
2 If you want to repeat playback in the
selected play mode, press RPT/ENT.
“
” appears in the display.
Creating a Program (Program Play)
You can set the program with up to 20
tracks.
On the recorder
1 Press the jog dial while “PGM” flashes
in the display at step 2 of “Selecting a
play mode.”
2 Turn the jog dial to select a track, and
then press to enter a track number.
3 Repeat step 2 to program more tracks.
4 Press the jog dial for 2 seconds or more.
On the remote control
1 While the recorder is playing, press
PLAYMODE repeatedly until “PGM ”
flashes in the display.
2 Turn the control repeatedly to select a
track, and then press RPT/ENT to enter
a track number.
3 Repeat step 2 to program more tracks.
4 Press RPT/ENT for 2 seconds or more.
Notes
• All program settings are lost when the lid of
the recorder is opened.
• If you turn group mode on or off during the
setting of a program, program setting mode
will be canceled, but the program contents
up to that point will remain.
• You cannot turn group mode on or off while
programming tracks.
<
<
02.4.30, 3:09 PM 102