Sony MZ-R910 User Manual

Page 103

Advertising
background image

103

Operating Instructions

MZ-R910.3-234-699-01(1)

• If you turn group mode on during program

play, the program play is canceled.

Adjusting treble and bass
(Digital Sound Preset)

See the illustrations in Japanese text (pages 39
and 41).

You can adjust the treble and bass to suit
your taste. The recorder can store two sets
of treble-bass adjustments, which can then
be selected later during playback.
The sound can be adjusted in 8 steps (–4, –
3, ...±0, ...+2, +3). Settings can be stored to
the Personal Disc Memory.

Selecting the sound quality

Factory settings of the Digital Sound Preset
are as follows:
• “SOUND1” : bass +1, treble ±0
• “SOUND2”: bass +3, treble ±0

On the recorder

1

Press the jog dial.

2

Turn the jog dial until “SOUND” flashes
in the display, and then press to enter.

3

Turn the jog dial until “SOUND 1” or
“SOUND 2” flashes in the display, and
then press to enter.

On the remote control

1

Press SOUND on the remote control
repeatedly to select “SOUND 1” or
“SOUND 2”.

Adjusting the sound quality

On the recorder

1

Press the jog dial.

2

Turn the jog dial until “SOUND” flashes
in the display, and then press to enter.

3

Turn the jog dial until “SOUND 1” or
“SOUND 2” flashes in the display.
The display shows the currently selected
T (treble) and B (bass) settings.

4

Select “T” or “B” pressing x or X.
You can change the adjust of the item in
which the cursor is flashing.

5

Turn the jog dial to adjust the sound level.

To move the cursor between “T” to “B”:

Press x or X.

To switch between “SOUND 1” to
“SOUND 2”:

Press X repeatedly to move the cursor to
the top row, and then turn the jog dial.

6

Press the jog dial to enter.
The sound settings are saved and the
playback display appears again.

On the remote control

1

Press SOUND on the remote control
repeatedly to select “SOUND 1” or
“SOUND 2”.

2

During playback, press SOUND for 2
seconds or more.
The recorder changes to B-setting mode.
Pressing the SOUND button for 2
seconds again changes the recorder back
to T-setting mode.

3

Turn the control repeatedly to adjust the
bass or treble.

To switch “B” and “T”:

Press SOUND for 2 seconds or more.

To switch “SOUND 1” and “SOUND 2”:

Press SOUND for a short time.

4

Press x to enter .

To cancel the Digital Sound Preset

• On the recorder

Select “SOUND OFF” in step 3.

• On the remote control

Press SOUND repeatedly until nothing
appears in the display.

Notes

• Digital Sound Preset becomes inoperative

when the “AUDIO OUT” parameter for the
i

/LINE OUT jack is set to “LINE OUT”. In

this case, set the “AUDIO OUT” to
“HeadPhone” (page 94).

• When you use the Digital Sound Preset, the

sound may break or become distorted
depending on the settings or the track. In
this case, change the settings of the sound
quality.

• Changing to another Digital Sound Preset

during a recording operation will not affect
the quality of recorded sound.

02.4.30, 11:34 AM

103

Advertising