Sony MZ-R910 - Manual (Page 107)

107
Operating Instructions
MZ-R910.3-234-699-01(1)
On the remote control
1 Insert a disc and do the following.
See step 1 of “On the recorder” to check
the varieties of name you can relabel.
2 Follow steps 2 to 4 of “On the remote
control” (page 106) in “Labeling
recordings” to display a track, group, or
disc name.
3 Follow steps 5 to 7 of “On the remote
control” (pages 106 and 107) in
“Labeling recordings”, and then keep
pressing the x for 2 seconds or more.
To cancel labeling
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Notes
• Track and disc titles that were entered in
Japanese katakana characters will appear in
Roman letters on minidisc players that do
not support the display of katakana
characters. Such titles will be marked with a
“^” at the beginning and the end.
• You cannot relabel premastered MDs or
label MDs that have not been recorded.
• The recorder cannot rewrite a track, group,
or disc name of more than 200 letters that
was created by another device.
Storing phrases frequently
used in labeling (Name Bank
Function)
See the illustrations in Japanese text (page 50).
Phrases that you often use while labeling
can be stored in the recorder’s memory.
Approximately 25 phrases of about 10
characters each (with a total character
count of about 400) can be stored in the
phrase bank. The actual number will
depend on the length of each phrases.
Storing phrases while labeling a
track or disc
You can store phrases in three ways.
• Storing phrases while labeling a
track, group, or disc:
You can store phrases while labeling a
track, group, or disc by doing the
procedure “Labeling recordings” (page
105).
To delete a letter and
move back all following
letters to the left. Press
PLAYMODE.
1) If phrases are stored in the name bank, the
first phrase stored appears in the display
(page 107).
6 Repeat step 5 and enter all characters of
the label name.
7 Keep pressing x for 2 seconds or longer.
The track or disc is labeled.
To cancel labeling
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Notes
• When the recording is stopped while labeling a
track, a group, or a disc during recording, or
when the playback moves on to the next track
while labeling a track during playback, the input
at that point is entered automatically.
• “LP:” has automatically been added at the
beginning of the track names for tracks recorded
in MDLP mode.
• You cannot label or relabel the premastered
disc.
Relabeling recordings
On the recorder
1 Insert a disc and do the following.
To relabel a track:
Start playing a track you want to relabel,
and change a track name while the
recorder is playing.
To relabel a group:
Turn the group mode on (page 97) and
start playing or recording a track within
the group you want to relabel, and
change the group name while the
recorder is playing or recording.
To relabel a disc:
Relabel the disc while the recorder is
stopped or recording.
If you relabel a disc with group settings,
turn the group mode on (page 97).
2 Follow steps 2 to 4 of “Labeling
recordings” (page 105) to display a track,
group, or disc name.
3 Follow steps 5 to 8 of “Labeling
recordings” (page 106), and then keep
pressing the jog dial for 2 seconds or
more.
02.4.30, 11:34 AM 107