Sony MZ-R910 - Manual (Page 110)

110
MZ-R910.3-234-699-01(1)
• When group mode is OFF:
Several tracks are registered as one group.
The following section explains the
operation when group mode is on.
On the recorder
1 Press GROUP for 2 seconds or more to
turn the group mode on.
2 While the recorder is stopped, press the
jog dial.
3 Turn the jog dial until “EDIT” flashes in
the display, and then press to enter.
4 Turn the jog dial until “ : Set” flashes in
the display, and then press to enter.
5 Turn the jog dial until the number or
name of the desired first track flashes in
the display, and then press to enter.
This selects the first track of the new group.
Even when the group mode is on, track
numbers appear according to their order
on the disc, not their order within the
group.
6 Turn the jog dial until the number or
name of the desired last track flashes in
the display, and then press to enter.
This selects the last track of the new group.
7 Follow steps 4 to 8 of “Labeling
recordings” (page 106) to label a group.
On the remote control
1 Follow the procedure of “To activate the
group mode” (page 97) to turn the group
mode on.
2 While the recorder is stopped, press
DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until “EDIT”
flashes in the display, and then press x
to enter.
4 Turn the control repeatedly until
“GP: Set” flashes in the display, and
then press x to enter.
5 Turn the control repeatedly until the
number or name of the desired first
track flashes in the display, and then
press x to enter.
6 Turn the control repeatedly until the
number or name of the desired last track
flashes in the display, and then press x
to enter.
7 Follow steps 5 to 7 of “On the remote
control” in “Labeling recordings” (pages
106 and 107) to label a group.
Erasing phrases
On the recorder
1 While the recorder is stopped, press the
jog dial.
2 Turn the dial until “EDIT” appears, and
then press to enter.
3 Turn the jog dial until “BankErase”
appears, and then press to enter.
4 Turn the jog dial until the phrase you
want to erase flashes in the display, and
then press to enter.
“Erase!” appears and the phrase is
erased.
On the remote control
1 While the recorder is stopped, press
DISPLAY for 2 seconds or more.
2 Turn the control repeatedly until “EDIT”
flashes in the display, and press x to
enter.
3 Turn the control repeatedly until
“BankErase” appears in the display, and
then press x to enter.
4 Turn the control repeatedly until the
phrase you want to erase appears, and
then press x to enter.
To cancel the operation
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Registering tracks or groups as
a new group (Group Setting)
See the illustrations in Japanese text (pages 53
and 54).
Do the following procedure to register
tracks or groups as a new group. The
tracks or groups must, however, be
sequential. If the desired tracks or groups
are not consecutive, you must move them
to make them consecutive before you can
register them (“Moving recorded tracks”,
page 111). The operation of this function
depends on whether group mode is on or
off.
• When group mode is ON:
Several groups are registered as one group.
A track without group setting can be
registered to an existing group.
02.4.30, 11:34 AM 110