Sony MZ-R910 - Manual (Page 112)

112
MZ-R910.3-234-699-01(1)
6 Turn the control repeatedly until the
number of the destination track within
the group flashes in the display, and
then press x to enter.
To cancel moving
Press CANCEL on the recorder.
Press DISPLAY for 2 seconds or more on the
remote control.
Changing the order of a group
on a disc (Group Move)
See the illustrations on Japanese text (page 58).
On the recorder
1 Press GROUP for 2 seconds or more.
2 While playing a track within a group
whose order you want to change, press
the jog dial.
3 Turn the jog dial until “EDIT” flashes in
the display, and then press to enter.
4 Turn the jog dial until “ : Move”
flashes in the display, and then press to
enter.
The group number to which the
currently playing track belongs flashes
in the middle section of the display. If
the group has been labeled, press > to
display the group name. Press . to
return to the group number display.
5 Turn the jog dial to select the destination
point on the disc, and then press to enter.
On the remote control
1 Follow the procedure of “To activate the
group mode” (page 97) to turn the group
mode on.
2 While playing a track within a group
whose order you want to change, press
DISPLAY for 2 seconds or more.
3 Turn the control repeatedly until “EDIT”
flashes in the display, and then press x
to enter.
4 Turn the control repeatedly until “GP:
Move” appears in the display and then
press x to enter.
5 Turn the control repeatedly to select a
destination point on the disc, and then
press x to enter.
Moving a track to a different
group
See the illustration in Japanese text (page 57).
On the recorder
1 Press GROUP for 2 seconds or more to
turn the group mode on.
2 While playing the track you want to
move, press the jog dial.
3 Turn the jog dial until “EDIT” flashes in
the display, and then press to enter.
4 Turn the jog dial until “ : Move” flashes
in the display, and then press to enter.
5 Turn the jog dial until the destination
group flashes in the display, and then
press to enter.
The group number to which the
currently playing track belongs flashes
in the middle section of the display. If
the group has been labeled, press > to
display the group name. Press . to
return to the group number display.
6 Turn the jog dial until the number of the
destination track within the group
flashes in the display, and then press to
enter.
The selected track number or name of
the group that the selected track belongs
flashes in the display. If the track has
been labeled, press > to make the
track name appear in the display. Press
.
to display the track number again.
On the remote control
1 Follow the procedure of “To activate the
group mode” (page 97) to turn the group
mode on.
2 Press DISPLAY for 2 seconds or more
while the track you want to move is
playing.
3 Turn the control repeatedly until “EDIT”
flashes in the display, and then press x.
4 Turn the control repeatedly until “ :
Move” flashes in the display, and then
press x to enter.
5 Turn the control repeatedly until the
destination group flashes in the display,
and then press x to enter.
02.4.30, 11:34 AM 112