Sony MZ-R910 - Manual (Page 116)

116
MZ-R910.3-234-699-01(1)
B Power sources
You can use the recorder on …
– house current.
– a nickel metal hydride rechargeable
battery (supplied).
– dry battery (not supplied).
It is preferable to use the recorder on house
current when recording for a long time.
When using a battery, make sure it is a
fully charged rechargeable battery or a new
alkaline dry battery to prevent operations
(e.g., recording and editing.) from failing
due to insufficient battery power.
Battery life
The battery life may be shorter due to
operating conditions and the temperature
of the location.
When recording (JEITA 1) )
(Unit: approx. hours)
Batteries Stereo LP2 LP4
NH-14WM(A)
nickel metal
hydride
rechargeable
battery
2)
12 17 21
LR6 alkaline
dry battery
3)
12 19 23
NH-14WM(A)
nickel metal
hydride
rechargeable
battery + one
LR6 30 43 52
1) Measured value by the standard of JEITA
(Japan Electronics and Information
Technology Industries Association).
2) When using a 100% fully charged
rechargeable battery.
3) When using a Sony LR6 (SG) “STAMINA”
alkaline dry battery (produced in Japan).
To erase information
• On the recorder
In step 3, turn the jog dial until “Erase?”
flashes in the display, and then press to
enter.
• On the remote control
In step 3, turn the control until “Erase?”
flashes in the display, and then press x to
enter.
Notes
• The settings for up to 20 discs can be stored.
Any settings stored afterwards will replace
the settings for the least used disc among the
20.
• If you add tracks or perform an editing
operation (not including labeling) to a disc
whose settings have been stored on the
recorder, the disc will no longer be
recognizable by the recorder and the stored
information will become useless. In this
case, store the settings again.
Turning off the beep sound
See the illustrations in Japanese text (page 66).
Using the recorder, you can turn off the beep
sound on the recorder and the remote control.
Using the remote control, you can turn off the
beep sound on the remote control only. To
turn off the beep sound by using remote
control, see “Menu functions” (page 90).
1 Press the jog dial.
2 Turn the jog dial until “OPTION”
flashes in the display, and then press to
enter.
3 Turn the jog dial until “BEEP” flashes in
the display, and then press to enter.
4 Turn the jog dial until “MAIN UNIT” or
“REMOTE” flashes in the display, and
then press to enter.
MAIN UNIT: when turning off the beep
sound on the recorder.
REMOTE: when turning off the beep
sound on the remote control.
5 Turn the jog dial until “BEEP OFF”
flashes in the display, and then press to
enter.
To turn on the beep sound
Select “BEEP ON” in step 5.
02.4.30, 11:34 AM 116