Sony MZ-R910 User Manual

Page 118

Advertising
background image

118

MZ-R910.3-234-699-01(1)

READ ERR :

The recorder cannot read the disc
information correctly. Reinsert the
disc.

SORRY :

You tired to set Digital Sound Preset
while the “AUDIO OUT” parameter is
set to “LINE OUT.” Use the jog dial to
set the “AUDIO OUT” parameter to
“HeadPhone.”
You tried to erase a track mark while
playing the MD or at the beginning of
the first track.
You tried to erase a track mark to
combine tracks the recorder cannot
combine (a track recorded in different
recording mode such as in LP2 and
LP4, or a track recorded through
analog connection and digital
connection)*.
You tried to overwrite a track mark.
You tried to press X, T MARK or REC
MODE while synchro-recording or the
joint text function is active.

* If you have recorded or erased many

times on the same MD, the data of a
single track may be scattered
throughout the MD. When the data is
scattered in groups of less than 12
seconds long, the recorder will not be
able to combine the tracks.

TEMP OVER :

Heat has built up in the recorder. Wait
until the recorder cools down.

TOC Edit :

The MD recorder is recording
information (track start and end
position) from the memory to the disc.
Wait until this process is completed.
Do not expose the recorder to physical
shock, nor disrupt power supply.

TOC ERR :

The recorder cannot read the disc
information correctly. Insert another
disc. If it is no problem to erase all the
contents of the disc, erase all (page 114).

TR FULL:

You tried to record more than 254
tracks.

TrPROTECT :

You tried to record over or edit a track
which has been protected from being
recorded over*.

* Track-protected MiniDiscs — Some

MD recorders will let you protect
individual tracks from being recorded
over. This recorder, however, does not
offer this feature.

MENU :

You pressed a key on the remote
control while selecting a menu on the
recorder.

NAME FULL :

You tried to enter more than 200 letters
to label a single track or disc.
You tried to enter a total of more than
1700 letters for track or disc names.

NO COPY :

You tried to make a copy from a disc
that is protected by the Serial Copy
Management System. You cannot
make copies from a digitally connected
source which was itself recorded using
the digital connection. Use the analog
connection instead.

NO DISC :

You tried to play or record with no
disc in the recorder.

No Entry! :

You tried to erase a setting in the
Personal Disc Memory on a disc that
contains no settings in the Personal
Disc Memory.

NO SIGNAL :

The recorder could not detect digital
input signals. Make sure that the
source is connected firmly. If the
message appears while recording,
press x to end recording.

NO TEXT:

You tried to use the CD text copying
function to copy a track or disc name
from a CD that has no text data.

NV ERROR :

Internal processing was not correctly
done. Reinsert the disc or try repeating
the recorder operation. If the same
message appears again, a mechanical
problem may be the cause. In this case,
consult your nearest Sony dealer.

P/B ONLY :

You tried to record or edit on a
premastered MD (P/B stands for
playback).

PROTECTED :

You tried to record or edit on an MD
with its tab in the record-protect
position.

REC ERR :

The recording is not correctly done.
Place the recorder at no vibration and
record again. The disc is dirty (with oil
stain or finger prints), scratched, or out
of standard. Record again with another
disc.

02.4.30, 11:34 AM

118

Advertising