Sony MZ-R910 User Manual
Page 97
97
Operating Instructions
MZ-R910.3-234-699-01(1)
Notes
• The group function setting is stored even if
you eject the MD or turn off the recorder.
• In group mode, the recorder treats all tracks
without group settings as belonging to the
last group on the disc. The last group is
indicated in the display window on the
recorder as “Group – –.” Within a group, the
tracks appear in their order on the disc, not
their order within the group.
• Note that a group setting cannot be made if
the total character count for the tracks,
groups and disc name on the disc exceed the
maximum number that can be input.
To activate the group mode
To record tracks in group mode, you must
first turn the group mode on before the
start of recording.
On the recorder
1
Press GROUP for 2 seconds or more.
“G” and “GROUP ON” light up in the
display and the group mode turns on.
To cancel the group mode, press
GROUP for 2 seconds or more.
On the remote control
1
Press DISPLAY for 2 seconds or more.
2
Turn the control repeatedly until
“GROUP” flashes in the display, and
then press x to enter.
3
Turn the control repeatedly until
“GROUP ON” flashes in the display,
and then press x to enter.
“G” lights up in the display and the
group mode turns on.
To cancel the group mode, select
“GROUP OFF” in step 2.
Recording a track into a new
group
• Turn the group mode on.
1
Press END SEARCH.
2
Press and slide REC to the right.
3
Play the source sound.
To stop recording, press x.
The material that was recorded up until x
was pressed is entered as a new group.
Recording a track into an
existing group
• Insert a disc with group settings.
• Turn the group mode on.
1
Press GROUP slightly.
“
” flashes and you can select a group
directly (group skip mode).
2
Within 5 seconds, press . or >
repeatedly until the group you want the
track to belong to appears.
3
Press and slide REC to the right.
4
Play the source sound.
Newly recorded track is added after the
current contents.
Notes
• Even if “REC-Posi” is set to “From Here”,
newly recorded tracks are inserted after the
existing tracks in the specified group
without recording over the current contents.
• Group skip mode turns off automatically in
step 2 if nothing is done within 5 seconds.
To continue the procedure, do step 1 again.
Recording without
overwriting existing material
See the illustration in Japanese text (page 28).
If you wish to avoid overwriting the
current contents of an MD, do the
following procedure. All new material will
then be recorded from the end of the
current contents.
1
While the recorder is stopped, press the
jog dial.
2
Turn the jog dial until “OPTION” flashes
in the display, and then press to enter.
3
Turn the jog dial repeatedly until “REC-
Posi” flashes in the display, and then
press to enter.
4
Turn the jog dial repeatedly until “From
End” flashes in the display, and then
press to enter.
To start recording from the current point
Select “From Here” in step 4.
02.4.30, 11:34 AM
97