Sunbeam SM8650 - Manual (Page 14)

12
Heading
After each use
1. Always remove the power cord from the
power outlet before cleaning and remove
the detachable shaft of the stick mixer.
Note: Do not immerse, that is, soak the
detachable shaft of the stick mixer in water
because overtime the lubrication on the
bearings can wash away.
2. Wash the detachable shaft under running
water, without use of abrasive detergents.
3. When you have finished cleaning the
detachable shaft of the StickMaster, place
it upright so that any water which may
have got in, can drain out.
4. Attachments including the beaker, beaker
mat, chopper bowl, chopper mat and
chopping blade (provided with models
SM6400 and SM8650) and whisk
(provided with models SM6400 and
SM8650) can be washed in hot soapy
water.
5. Dry thoroughly.
Important: Blades are extremely sharp, handle
with care.
Note: Should the stainless steel chopper
blade dull from extensive use, sharpening is
recommended at your local sharpening shop
to ensure consistent results.
For a quick wash up
Between processing tasks, hold the
StickMaster in the beaker half filled with
water and depress the power button for a few
seconds.
Dishwasher Use
All plastic components deteriorate through
prolonged dishwasher use.
However, parts of your StickMaster are
tolerant to dishwasher use. These include
the shaft, beaker, chopper bowl, chopper
blade (provided with models SM6400 and
SM8650), non-slip mats and whisk (provided
with models SM6400 and SM8650).
Note: Place only on the top rack of the
dishwasher.
Important: Motor housing is not dishwasher
safe.
Motor Housing
Clean the motor housing with a damp cloth.
Important: Ensure that the motor housing is
not immersed in water or any other liquid.
Care and Cleaning