Sharp IM-DR400E - Manual (Page 47)

47
IM-DR400E
1
2
3
4
5
6
03/7/21 IM-DR400E_6.fm IM-DR400E TINSE0562AWZZ
Ref
e
renc
es
-E
rr
o
r M
ess
a
g
es
-
A number or symbol appears in (*) position.
ERROR
MESSAGES
MEANING
NO SIGNAL " Poor connection of the digital cable.
" No output signal comes out from the
connected unit.
(Use the AC power for the connected
unit.)
" The input signal has improper sam-
pling frequency.
PLAY MD " You tried to record on a playback-
only disc.
POWER? " AC adaptor other than specified.
PROTECTED " The write protection tab of a MiniDisc
is set to the protected position.
SORRY " Since a track number is currently be-
ing located or updated, the unit can-
not accept your command.
(Wait a while and try the operation
again.)
ERROR
MESSAGES
MEANING
TEMP OVER " The temperature is too high.
(Turn off the power, and wait a while.)
TOC FORM
(**) " There is an error in the recording sig-
nal.
(Erase all of the tracks, and then record
again.)
TOC FULL " There is no space left for recording
character information (track names,
disc names, etc.).
Tr. Protect " The track has been protected from
being erased.
(Edit the track with the device on which
it was recorded.)
? DISC " A disc which contains data other
than music was played.
(A disc which contains nonmusic data
cannot be played.)
" There is an error in the signal record-
ed on the disc.
8