Samsung DVD-HD950 - Manual (Page 6)

ENG-11
Setup
ENG-10
S E T U P
Rear Panel
1. ANYNET JACKS
- Use the Anynet cable to connect the Anynet jack of
your television or AV device.
2. 5.1CH ANALOG AUDIO OUT JACKS
- Connect to an amplifier with 5.1ch analog input jacks.
3. DIGITAL AUDIO OUT JACKS
- Use either an optical or coaxial digital cable to connect
to a compatible Dolby Digital receiver.
- Use either an optical or coaxial digital cable to connect
to an A/V Amplifier that contains a Dolby Digital,
MPEG2 or DTS decoder.
4. AUDIO OUT JACKS
Connect to the Audio input jacks of your television or
audio/video receiver.
5. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
- The Video Output in Setup Menu must be set to
COMPONENT(I-SCAN) or COMPOSITE/S-VIDEO.
6. S-VIDEO OUT JACK
- Use the S-Video cable to connect this jack to the
S-Video jack on your television for higher picture
quality.
- The Video Output in Setup Menu must be set to
COMPOSITE/S-VIDEO.
7. HDMI OUT JACK
- Use the HDMI cable to connect this jack to the HDMI
jack on your television for the best quality picture.
- If an HDMI cable is connected to an HDMI-compatible
TV, HDMI will be output automatically a maximum of 10
seconds later.
- If you want to use a Video, S-Video or Component
Output, unplug HDMI cable.
8. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P R , P B and Y video.
- If HDMI/COMPONENT(P-SCAN) Video Output is
selected in Setup Menu, progressive scan mode will
work.
- If COMPONENT(I-SCAN) Video Output is selected in
Setup Menu, interlaced scan mode will work.
Note
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the
TV’s menu system.
- If HDMI/COMPONENT(P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do
not work.
- The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion
adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.
- There may be no image output if the DVD player is connected to a TV or display that is not compatible with
the above format.
- Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.
- See pages 65 ~ 67 to get more information on how to use the setup menu.
3
1 2 3 4 5 6 6 7
8
S E T U P
Tour of the Remote Control
1. DVD POWER Button
Turns the power on or off.
2. NUMBER Buttons
3. PROG Button
Allows you to program a specific order.
4. STEP Button
Advances play one frame at a time.
5. VOL (+, -) Buttons
Control volume.
6. TV/VIDEO Button
Press to display all of the available video sources
( i.e., TV, Cable, Video)
7. VIDEO SEL. Button
Selects Video output format.
8. SEARCH Buttons ( / )
Allow you to search forward/backward through a disc.
9. STOP Button ( )
10. SKIP Buttons ( / )
Use to skip the title, chapter or track.
11. MENU Button
Brings up the DVD player’s menu.
12. RETURN Button
Returns to a previous menu.
13. ZOOM Button
Enlarges DVD picture.
14. AUDIO Button
Use this button to access various audio functions on a disc.
15. SUBTITLE Button
16. INDEX Buttons
Use to skip the INDEX.
17. SACD/CD Button
Selects Super Audio CD or CD playback mode.
18. TV POWER Button
Turns the TV’s power on or off.
19. CLEAR Button
Use to remove menus or status displays from the screen.
20. INSTANT SKIP Button
This function skips playback ahead 10 seconds.
21. INSTANT REPLAY Button
This function is used to replay the previous 10 seconds
of a movie from the current position.
22. CH ( , ) Buttons
Channel selection.
23. OPEN/CLOSE ( ) Button
To open and close the disc tray.
24. HDMI SEL. Button
HDMI or DVI Output resolution setup.
25. PLAY/PAUSE Button ( )
Begin/Pause disc play.
26. INFO Button
Displays the current disc mode.
27. DISC MENU Button
Brings up the Disc menu.
28. ENTER/ … † œ œ √ Buttons
This button functions as a toggle switch.
29. EZ VIEW Button
The aspect ratio of a picture can easily be adjusted
according to the screen size of your TV (16:9 or 4:3).
30. ANGLE Button
Use to access various camera angles on a DVD.
31. REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
32. PAGE Buttons
Use to skip the PAGE.
33. BOOKMARK Button
34. SHUTTLE DIAL (Search mode)
Performs fast motion play.
35. JOG DIAL (Step mode)
Operates frame by frame play. In CD mode,
performs track search.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
HD950-XSS-1 6/11/05 9:49 AM Page 10