Sharp MD-MT16H User Manual

Page 20

Advertising
background image

19

To erase tracks

To erase tracks one at a time:

1

Start playing the track you want to erase,
and press the

06

button.

The unit will enter the pause mode.

2

Press the EDIT button to select
“ERASE”.

3

Press the ENTER/SYNC button.

To cancel the operation, press the

/:OFF button.

4

Press the ENTER/SYNC button again.

The track will be erased.

5

To erase other tracks, repeat steps 1 -4.

To erase all of the tracks at once:

1

Whilst in the stop mode, press the EDIT

button to select “ALL ERASE”.

“ALL ERASE” can also be selected
by holding down the EDIT button for
at least 2 seconds.

2

Press the ENTER/SYNC button.

To cancel the operation, press the

/:OFF button.

3

Press the ENTER/SYNC button again.

All of the track numbers, track names,
and disc names will be erased.

Notes:

Once a track has been erased, it cannot
be recovered. Double-check the track
number before erasing it.

When a track is erased, the numbers as-
signed to the tracks following the erased
track will be automatically decreased by
one.

When a track is erased, the track name
will be erased at the same time.

Number of the
paused track

1

2

3

4

1

2

* MD-MT16H FOR UK(01-21)

99.4.2, 0:57 PM

20

Advertising