Lamp schedule, Osd display, Source osd – Samsung 400TS-3 User Manual
Page 141
Advertising
•
Off
A message will read No Signal if no input signal is detected.
•
On
Power-saving mode will be activated if no input signal is detected.
•
Auto
When no input signal is detected,
- Power-saving mode will be activated if an external device is connected.
- A message will read No Signal if no external device is connected.
Note
•
Enabled only in PC, DVI, HDMI, or DP(DisplayPort) mode.
•
Auto will be disabled in HDMI mode.
Lamp Schedule
Adjusts the luminance to a user-specified value at a specified time.
OSD Display
Displays or hides a menu item on the screen.
Source OSD
•
Off
•
On
Adjusting the LCD Display
Advertising
This manual is related to the following products: