Samsung 400TS-3 - Manual (Page 144)

Reset all the settings for the display.
Multi Control
Available Modes
• PC / DVI / DisplayPort
• AV
• Component
•
HDMI
•
MagicInfo
•
TV
Note
• MagicInfo can only be enabled when a network box(sold separately) is connected.
• A TV tuner box (sold separately) must be connected to use the TV.
Multi Control
Assigns an individual ID to the SET.
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
• MDC Connection
Selects a port to receive the MDC inputs from.
• RS232C MDC : Communicates with the MDC via a RS232C MDC cable.
• RJ45 MDC : Communicates with the MDC via an RJ45 MDC cable.
• Network Setting
• IP Setting : Manual, Auto
• IP Address : Manually enter the IP Address if IP Setting is set to Manual.
Adjusting the LCD Display