Samsung 245BPLUS - Manual (Page 11)

4. Align the mounting interface Pad with the holes in the rear cover mounting pad and
secure it with four screws that came with the arm-type base, wall mount hanger or other
base.
z
Do not use screws longer than the standard dimension, as they may damage the
inside of the Monitor.
z
For wall mounts that do not comply with VESA standard screw specifications, the
length of the screws may differ depending on their specifications.
z
Do not use screws that do not comply with the VESA standard screw
specifications.
Do not fasten the screws too tightly, as this may damage the product or cause the
product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
z
Samsung is not liable for product damage or personal injury when a non-VESA or
non-specified wall mount is used or the consumer fails to follow the product
installation instructions.
z
To mount the monitor on a wall, you should purchase the wall mounting kit that
allows you to mount the monitor at least 10cm away from the wall surface.
z
Contact the nearest Samsung Service Center for more information. Samsung
Electronics will not be responsible for damages caused by using a base other than
those specified.
z
Please use Wall Mount according to the International standards.