Sharp Notevision XG-C465X - Manual (Page 36)

-34
Image Projection
Switching the INPUT
Mode
Select the appropriate input mode for the con-
nected equipment.
On the remote control
Press , , , or on the
remote control to select the input mode.
On the projector
1 1 1 1 1 Press an INPUT (' ' ' ' '/" " " " ") button.
• The INPUT list appears.
2 2 2 2 2 Press ' ' ' ' '/" " " " " to select an item on
the list.
3 3 3 3 3 Press ENTER.
Note
• When no signal is received, “NO SIGNAL”
will be displayed. When a signal that the
projector is not preset to receive is received,
“NOT REG.” will be displayed.
About the INPUT mode
"On-screen Display of INPUT Mode (Example)
Using RGB
Using Component
COMPUTER/
COMPONENT 1, 2
mode
VIDEO mode
S-VIDEO mode
COMPUTER 1
RGB
1024 × 768
1
COMPUTER 1
Component
720P/750P
1
VIDEO V
S-VIDEO S
Used for projecting images
from equipment that sends
RGB signals or Component
signals connected to the RGB
input terminal.
Used for projecting images
from equipment that sends DVI
Digital RGB and Digital Com-
ponent signals connected to
the DVI-D input terminal.
Used for projecting images
from equipment connected to
the S-VIDEO input terminal.
Used for projecting images
from equipment connected to
the VIDEO input terminal.
COMPUTER/
COMPONENT
1, 2
DVI-D
S-VIDEO
VIDEO
INPUT buttons
/ / / /
DVI-D mode
"On-screen Display of INPUT list
INPUT
1 COMPUTER 1
2 COMPUTER 2
DVI
S-VIDEO
VIDEO
ENTER SEL.
D
S
V
D. PC RGB
1024
× 768
DVI D