Samsung DVD-R120 EN - Manual (Page 27)

English - 27
S
ystem Setup
4 Press the …† buttons to select On for the
Auto Clock.
5 Press the OK button, then the date and
time will be saved.
If you don’t press the OK button, it will not be saved.
This menu is used to set the current time.
You need to set the time to use timer recording.
1 With the unit in Stop mode/No Disc mode,
press the MENU button.
2 Press the …† buttons to select Setup, then
press the OK or √ button.
3 Press the …† buttons to select Clock Set,
then press the OK or √ button.
Use navigation …†œ √ buttons to input Time, Date
or Year. Use number buttons to input clock data
directly. The day of the week is displayed
automatically.
Setting the Clock
■ You must have the RF cable connected to
set the Auto Clock. See page 19.
■ The DVD Recorder automatically sets the
clock according to the time signal
broadcast between the channels PR1 to
PR5. If you do not need the Auto clock
set function, select Off.
NOTE
RETURN OK MOVE EXIT
Clock Set No Disc
12 : 00 01 / JAN / 2005 SAT Off
Time Date Auto Clock
Programme
Setup
RETURN OK MOVE EXIT
Clock Set No Disc
12 : 00 01 / JAN / 2005 SAT Off
Time Date Auto Clock
Programme
Setup
RETURN OK MOVE EXIT
Setup No Disc
System √ √
Clock Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
Install √ √
Programme
Setup
RETURN OK MOVE EXIT
Timer Record No Disc
Video Plus+ √ √
Timer Record √ √
Video Plus+ Extended : Off √ √
Programme
Setup
1-00687A-R120-UK_19~42 3/10/05 5:19 PM Page 27