Sony S-FRAME DPF-VR100 - Manual (Page 29)

29 GB
Ad
va
nce
d
o
pera
tio
ns
Maintenance mode
You can update the firmware of your photo
frame or initialize its system in this mode.
Tip
Perform firmware update or system initialization of
the photo frame in the following cases:
Firmware update:
Firmware update allows you to obtain optimum
performance and use the photo frame with upgraded
functions.
System initialization:
When your photo frame does not start properly,
initialize the system of the photo frame. If the
symptom persists, consult with your Sony dealer.
1
Confirm that the photo frame is
turned off.
2
Press while holding down VIEW
MODE on the photo frame to turn it
on.
Hold down VIEW MODE until the
following screen appears.
Maintenance mode is activated.
3
Press v/V to select [Update
firmware ] or [Initialize system] and
press .
Update firmware:
For detailed information on how to obtain
an update file or how to update the
firmware, access and view http://
www.sony.net/DPF.
Initialize system:
The operation screen is displayed.
Go to “Initializing the system” below.
1
Press B/b to select [Yes] in the
System initialization screen and
press .
The system of the photo frame is
initialized.
Tip
When system initialization has been executed,
menu settings and mark information will be
deleted, although the image and music data
stored in internal memory of the photo frame
will not be deleted.
2
When a completion message
appears, press 1 (on/standby) on
the photo frame to turn it off.
Activating maintenance mode
Initializing the system
Continued