Sony S-FRAME DPF-VR100 - Manual (Page 44)

44 GB
Items to set
*: Factory default settings
Item Setting Description
Picture mode Portrait Displays an image with optimum contrast and natural
color.
Standard* Displays an image impressively and with enhanced
color.
Vivid Displays an image more vividly using high chroma
saturation and sharpness.
Alarm Settings Sets the alarm function (page 41).
Auto Power
ON/OFF Sets the timer function which turns the power of the photo frame on or off automatically.
You can use this function with the following settings (page 39).
Simple You can set the auto power on/off time in one-minute increments
(page 39).
Power-ON
timer You can set the timer (time/day of the week) for when
the power is to be turned on automatically.
Power-OFF
timer You can set the timer (time/day of the week) for when
the power is to be turned off automatically.
Advanced* You can set the auto power on/off time in one-hour increments for each
day of the week.
OK If you press this button after setting the auto power on/
off time or day of the week, the setting is confirmed
and the previous screen is restored.
Cancel If you press this button after setting the auto power on/
off time or day of the week, the operation is canceled
and the previous screen is restored.
Reset all If you press this button after setting the auto power on/
off time or day of the week, all the setting times are
deleted.
Auto off You can specify two or four* hours after power on at which the photo
frame is to shut itself off if any button on the photo frame is pressed.
OFF The Auto Power ON/OFF function is not activated.
Date/time
Settings Sets the Date, Time, First day of the week, etc. (page 14).