Connections, 10_ connections – Samsung AK68-01808C User Manual

Page 10

Advertising
background image

connections

10_

connections

Connection to a TV (Interlace)

- Connecting to your TV using Component video cables.

- You will enjoy high quality and accurate color reproduction images. Component video separates the pic-

ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio
signals are delivered through the audio output.)

1

Using component video cables, connect the COMPONENT
VIDEO OUT
terminal on the rear of the DVD player to the
COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and
white) OUT
terminals on the rear of the DVD player to the
AUDIO (red and white) IN terminals of TV. Turn on the
DVD player and TV.

3

Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.

4

Set the Video Output to I-SCAN in the Display Setup menu.
(See pages 28-29)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 9).

Note

- If you want to connect to an Amplifier, please refer to the Amplifier connection page.

(See pages 12 to 13)

- The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”

depending on the manufacturer. The number and position of terminals can vary depending on the TV
set. Please refer to the user's manual of the TV.

RED

WHITE

RED

WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

Component cable

Advertising
This manual is related to the following products: