English _11 – Samsung AK68-01808C User Manual

Page 11

Advertising
background image

CONNECTIONS

English

_11

Connection to a TV (Progressive)

1

Using component video cables, connect the COMPONENT
VIDEO OUT
terminal on the rear of the DVD player to the
COMPONENT IN terminal of TV.

2

Using the audio cables, connect the AUDIO (red and
white) OUT
terminals on the rear of the DVD player to the
AUDIO (red and white) IN terminals of TV. Turn on the
DVD player and TV.

3

Press the input selector on your TV remote control until the
Component signal from the DVD player appears on the TV
screen.

4

Set the Video Output to P-SCAN in the Display Setup
menu. (See pages 28-29)
You can use the VIDEO SEL. button to change the Video
Output mode. (See page 9).

To see the progressive video output,

- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive

Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s
menu system.

- Depending on your TV, the connection method may differ from the illustration above.

Note

- What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method has. Progressive

scanning method can provide better and clearer picture quality.

RED

WHITE

RED

WHITE

RED

BLUE

GREEN

RED

BLUE

GREEN

Audio Cable

Component cable

Advertising
This manual is related to the following products: