Samsung AK68-01808C - Manual (Page 28)

changing setup menu
28_ changing setup menu
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Note :
Even when PCM Down sampling is Off
• Some discs will only output down sampled
audio through the digital outputs.
• To make the Setup menu disappear, press the
MENU-button.
• There is no analog audio output when you play a
DTS sound disc.
❶ Dolby Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Outputs Dolby Digital or DTS via the digital
output. Select Bitstream when connecting to
a Dolby Digital or DTS Decoder.
❷ MPEG-2 Digital Out
- PCM : Converts to PCM(2CH) audio.
- Bitstream : Converts to MPEG-2 Digital Bitstream
(5.1CH or 8CH). Select Bitstream when using the
Digital Audio Output.
❸ Dynamic Compression
- On : To select dynamic compression.
- Off : To select the standard range.
❹ PCM Down Sampling
- On : Select this when the Amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
- Off : Select this when the Amplifier connected to the
player is 96KHz compatible. In this case, all signals
will be output without any changes.
❺ Power On Music
This menu is used to activate or deactivate the
opening sound when you turn on the DVD player.
- On : To turn On Start up music
- Off : To turn Off start up muusic
Setting Up the Display
Options
Display options enable you to set various video functions of
the player.
1. With the unit in Stop mode, press the MENU button.
2. Press the π/† buttons to select Setup, then press the
® or ENTER button.
3. Press the π/† buttons to select Display Setup, then
press the ® or ENTER button.
4. Press the π/† buttons to select the desired item, then
press the ® or ENTER button.
❶ TV Aspect
Depending on a type of television you have, you
may want to adjust the screen setting (aspect ratio).
- 4:3 Letter Box : Select when you want to see
the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3
ratio screen. Black bars will appear at the top
and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central por-
tion of the 16:9 screen. (Extreme left and right
side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
Language Setup ®
Audio Setup ®
Display Setup ®
Parental Setup : ®
DivX(R) Registration ®
DISPLAY SETUP
TV Aspect
Screen Message
Black Level
TV System : PAL
Video Output : I-SCAN
4:3 Letter Box
4:3
Pan&Scan
√ 16:9 Wide
❸ Screen Messages
Use to turn on-screen messages On or Off.
❹ Black Level
Adjusts the brightness of the screen.(On or Off) It
does not function in PAL and Auto mode.