Sony HDW-M2100 - Manual (Page 48)

Chapter 5
Shot Mark Function
Chapter 5 Shot Mark Function
5-7
Camera IDs
SERIAL NUMBER 010001
DATE 1998.05.11
MODEL NAME DNW 0090
TIME 12.55.10
CASSETTE NUMBER 0095
ID1 AAAAAAAAAAAA
SHOT NUMBER 0052
ID2 BBBBBBBBBBBB
ID3 CCCCCCCCCCCC
ID4 DDDDDDDDDDDD
TCR 23:59:59:29 Recording
time code
First shot
mark in the
group
NO. TIME CODE
(---/180)
SHOT MARK
*012345-DNW_-0123-4567-
011 S1 10:04:05:11
013 V 10:07:05:02
012 R 10:05:35:24
----------------------------
014 R 10:08:35:04
015 S2 10:09:05:11
016 R 10:10:35:24
017 R 10:10:36:00
Shot data
Serial number (6 digits)
Model name (4 characters)
Model number (4 digits)
Cassette number (4 digits)
The tape is played back, and the shot data displayed.
To delete the shot data
Once again hold down the ENTRY button, and press
the PLAY button.
Example of shot data display
The shot data display appears as shown below.
The details in the shot data depend on the shooting
conditions. If because of the devices used there is no
shot data on a part of the tape, it appears as blank.
Displaying the shot data on the shot mark
list
Turn the MULTI CONTROL knob to position the
cursor on a separator in the shot mark list.
If there is shot data recorded when the immediately
following shot mark was written, it appears in the
display as shown below.
You can sort the shot marks in the list, based on the shot
data. For details, see the next section.