Sony HDW-M2100 - Manual (Page 69)

Chapter 8
Function Menu
Chapter 8 Function Menu
8-5
Page 3
Item Setting
F1 (SYNC) Sets the HD output signal sync phase.
Setting method
With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal
sync phase across the range ±15 µs relative to this unit’s input reference signal.
Adjust this item when you want to adjust the output signal sync phase precisely to match a reference
signal, or when connecting this unit and other VTRs to a device such as a switcher to perform operations
such as special effects editing.
F2 (SC) Sets the HD output signal sync phase.
Setting method
With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the output signal
phase across the range ±200 ns relative to this unit’s input reference signal.
F4 (EMPHSS) Specifies whether to add audio emphasis to analog audio input signals and Betacam/Betacam SP format
playback audio signals.
ON: Add audio emphasis.
OFF: Do not add audio emphasis.
F5 (T INFO) Selects the type of time data to display in time data display area 2.
TOTAL: Display total time.
REMAIN: Display remaining time.