Sony HDW-M2100 User Manual
Page 81
Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-11
Menu items in the range 100 to 199, relating to the control panels (Continued)
Item number Item name
Settings
111
TSO PLAY
Select whether or not to enable tape speed override mode.
DIS : Disable tape speed override mode.
TSO: Enable tape speed override mode.
116
JOG DIAL RESPONSE
Select the tape speed characteristics for the search dial rotation rate (VTR
commands).
TYPE1 : Tape speed varies linearly over the range –1 to +1.
TYPE2: Tape speed varies stepwise as shown in figure
a)
below over the range –3
to +3. (Characterized by a zone around –1 to +1 where the tape speed is
independent of the search dial rotation rate. When playing back an HDCAM
tape, however, tape speed characteristic TYPE 4 applies.)
TYPE3: Tape speed varies linearly over the range –3 to +3, as shown in figure
b)
below.
TYPE4: Tape speed varies stepwise as shown in figure
c)
below over the range –2
to +2. (Characterized by a zone around –1 to +1 where the tape speed is
independent of the search dial rotation rate)
117
CONTROL PANEL
SELECTION
Select the control panel function when the PANEL SELECT switch on the switch
panel is set to REAR.
SW : Only the control panel connected to the CONTROL PANEL connector on
the connector panel functions.
PARA : The control panels connected to the CONTROL PANEL connectors on
the switch panel and connector panel both function.
a)
b)
c)
+3
+1
-1
-3
FWD
FWD
RVS
RVS
+2
+1
-1
-2
FWD
FWD
RVS
RVS
+3
-3
FWD
FWD
RVS
RVS
Speed
(reverse)
Rotation rate
TYPE 2
TYPE 3
TYPE 4
Speed
Speed
Rotation rate
Rotation rate
(forward)
118
Select which switches and buttons can be operated when the KEY INHI switch on
the switch panel is set to ON. The following sub-items control different sets of
switches and buttons independently.
REMOTE
SELECT
Sub-item
Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel
are enabled.
DIS : Disabled
ENA: Enabled
2
AUDIO/F-KEY
1
Select whether the audio monitor signal selection buttons and F1 to F6 buttons in
the lower control panel are enabled.
DIS : Disabled
ENA: Enabled
AUDIO: The monitor signal selection do not function.
F-KEY: The function key (including HOME) do not function.
KEY INHIBIT SWITCH
EFFECTIVE AREA
3
MODE CONTROL Select which switch and button operations can be carried out from the lower
control panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations other than the audio monitor
signal selection buttons and F1 to F6 buttons are disabled.
ENA: All switches and buttons other than the audio monitor signal selection
buttons and F1 to F6 buttons are enabled.
(Continued)