Sony HDW-M2100 User Manual
Page 87
Chapter 9
Setup Menus
Chapter 9 Setup Menus
9-17
Menu items in the range 600 to 650, relating to the time code generator (Continued)
602
VITC POSITION SEL-2
(Invalid in 24PsF or
23.98PsF mode.)
In 59.94i, 29.97PsF mode
Select a line to insert the VITC in. (For SD output)
12H to 18H to 20H: Select any line from 12 to 20.
Note
You can insert the VITC signal in two places. To insert it in two places, set both
items 601 and 602.
In 50i, 25PsF mode
Select a line to insert the VITC in. (For SD output)
9H to 21H to 22H: Select any line from 9 to 22.
Note
You can insert the VITC signal in two places. To insert it in two places, set both
items 601 and 602.
Item number
Item name
Settings
606
TC OUTPUT SIGNAL IN
REGEN MODE
Select the signal output from the TIME CODE OUT connector during normal (1)
speed playback:
TAPE : During tape playback, the playback time code signal is output without
regeneration.
REGEN : The playback time code is output after regeneration.
617
LTC OUTPUT PHASE
Set the output phase of time code signals (LTC).
TCG/R : Output the playback time code signal during playback.
When the edit preset function is on, output the time code signal generated by
the internal time code generator.
INPUT: Use the same phase as the input video.
OUTPT: Use the same phase as the output video.
AUTO: Use the same phase as the input video when editing, and use the same
phase as the output video at other times (playback, etc.)
618
UPCONV EMBEDDED
VITC
(Invalid in 24PsF or
23.98PsF mode.)
Select the source time code for HD-SDI embedded VITC which is output after
subjected to up-conversion during playback of SD-format tape.
when
VITC : Select VITC recorded on SD-format tape.
LTC : Select LTC recorded on SD-format tape.
620
TC CONVERT 24F -> 25F
(In 50i or 25PsF mode
only. Not displayed when
operating in 720P-line
mode.)
Select whether to convert playback time code to 25F time code during playback
of tape recorded in 24PsF or 23.98PsF mode.
OFF : Do not convert time code.
ON: Convert time code.
TC CONVERT 25F -> 24F
(In 24PsF or 23.98PsF
mode only. Not displayed
when operating in 720P-
line mode.)
Select whether to convert playback time code to 24F time code during playback
of tape recorded in 50i or 25PsF mode.
OFF : Do not convert time code.
ON: Convert time code.
(Continued)