Sony HDW-M2100 - Manual (Page 92)

Chapter 9
Setup Menus
9-22
Chapter 9 Setup Menus
9-4 Items in the Extended Setup Menu
Menu items in the range 700 to 799, relating to video control (Continued)
Item name Settings Item number
726 H BLANKING WIDTH
(Invalid in 24PsF or
23.98PsF mode.) Select the horizontal blanking width of the video output signal.
NAROW : Digital blanking (narrow)
WIDE: Analog blanking (wide)
When WIDE is selected, the horizontal blanking width complies with RS170A, and
normally the blanking is widened and the image becomes narrower. It is
recommended to select NAROW at the editing stage, then later, for broadcast
transmission to select WIDE, to output a signal conforming to the standard.
728 OUTPUT SCH PHASE
(Invalid in 24PsF or
23.98PsF mode.) Set the subcarrier H phase.
0 to 800H to FFFH
740 MASTER LEVEL (HD) Adjust the high-definition video signal output from the HDSDI OUTPUT
connector.
This adjusts the Y, P
B
, and P
R
levels simultaneously.
0.0%(0H) to 100% (800H) to 141.3% (B4EH)
741 Y LEVEL (HD) Adjust the Y level of the high-definition video signal output from the HDSDI
OUITPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
732 COMPOSITE MODE
(Invalid in 24PsF or
23.98PsF mode.) Select the chroma filter through which the composite video output signals pass.
WIDE : Output via SMPTE wide
STD: Output via SMPTE standard (narrow)
742 P
B
LEVEL (HD) Adjust the P
B
level of the high-definition video signal output from the HDSDI
OUTPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
Control the H sync phase of the high-definition video signal output from the
HDSDI OUTPUT connector according to the menu.
0 to 80H to FFH
Fine control the H sync phase of the high-definition video signal output from the
HDSDI OUTPUT connector according to the menu.
0 to 3FFH
743 P
R
LEVEL (HD) Adjust the P
R
level of the high-definition video signal output from the HDSDI
OUTPUT connector.
0.0% (0H) to 100% (800H) to 141.3% (B4EH)
745 SETUP LEVEL (HD) Adjust the setup level (59.94i, 29.97PsF mode)/black level (50i, 25PsF mode) of
the high-definition video signal output from the HDSDI OUTPUT connector.
0 to 110H to 220H
746 SYNC PHASE (HD)
747 FINE (HD)