1-1 upper control panel, 1 control panels – Sony HDW-M2100 User Manual

Page 10

Advertising
background image

Chapter 2

Location and Function of Parts

2-2

Chapter 2

Location and Function of Parts

2-1-1 Upper Control Panel

Z

BETACAM/SP

BETACAM SX

MPEG IMX

Digital BETACAM

1(9P)

2(50P) RS-232C

HDCAM

POWER

PHONES

REMOTE

EJECT

1

POWER switch

2

REMOTE buttons and RS-232C indicator

4

Format indicators

5

PHONES jack and control

Cassette compartment

1

POWER switch

Pressing the ‘ ) ’ side of the switch powers the unit on.
When the unit is powered on, the audio setting display
section (see page 2-4) and the time data/menu display
section (see page 2-6) light.

2

REMOTE buttons and RS-232C indicator

Press the 1 (9P) button or 2 (50P) button to select the
device controlling this unit.

1(9P): This unit is controlled by the device connected

to the REMOTE 1-IN(9P) or REMOTE
1-OUT(9P) connector. The button lights when
pressed.

2(50P): This unit is controlled by the device

connected to the REMOTE 2 PARALLEL
I/O(50P) connector. The button lights when
pressed.

RS-232C indicator: This indicator lights when this

unit is controlled through the RS-232C connector.

3

EJECT button

To eject the cassette, press this button. While the
cassette is being ejected, this button lights.
When using the lower control panel as remote control
panel, press the DELETE button and STOP button at
the same time to eject the cassette.

Note

Ejecting with the EJECT button is a local operation. It
is not possible to eject a cassette in another unit by
remote control.

4

Format indicators

The indicator (BETACAM/SP, BETACAM SX,
MPEG IMX, Digital BETACAM, or HDCAM)
corresponding to the current recording or playback
format lights. The BETACAM/SP lights when the
format is Betacam or Betacam SP.

5

PHONES jack and control

Connect stereo headphones with an impedance of
8 ohms, to monitor the sound during playback and
editing.
The control knob adjusts the volume.
It is possible to set an internal board switch so that the
output volume from the MONITOR OUTPUT L and R
connectors is controlled simultaneously.

For details, refer to the Installation Manual.

3

EJECT button

2-1 Control Panels

Advertising
This manual is related to the following products: