Sony HDW-M2100 - Manual (Page 45)

Chapter 5
Shot Mark Function
5-4
Chapter 5 Shot Mark Function
Z
ENTRY button
LIST button
5-3 Shot Mark Operations
5-3-3 Shot Mark List Operations
Displaying the shot mark list
Hold down the ENTRY button and press the LIST
button.
All of the shot mark types for which item G02 in the
shot mark operation menu is set to “ON” appear in the
list. If you do the same operation again, the list display
disappears.
While the shot mark list is displayed, the function
menu display changes as follows.
SETING EXIT MEMO SELECT DELETE
SHT
MRK
Example of list display
The following figure shows how the list is organized.
Selecting a shot mark
Turn the MULTI CONTROL knob to align the asterisk
cursor with the desired shot mark.
Entering virtual shot marks
When the unit is stopped, performing playback, or
searching, hold down the ENTRY button and press the
MARK button.
Shot mark number of current cursor
position / total number of stored shot
marks
(011/180)
NO. TIME CODE
SHOT MARKER
*011 S1 10:04:05:11
013 V 10:07:05:02
012 R 10:05:35:24
----------------------------
----------------------------
014 R 10:08:35:04
015 S2 10:09:05:11
016 R 10:10:35:24
017 #R 10:10:36:00
Separator
between read-in
groups of shot
marks
Cursor (current
shot mark position)
Position in list
Shot mark type
R: recording start mark
S1: shot mark 1
S2: shot mark 2
V: virtual shot mark
P: post mark
#: memo mark
Time code
ENTRY button
Z
MARK button