Sharp YO-520 - Manual (Page 6)

4
Entering Characters
1.Moving the Cursor
The cursor ( _ , or ) can be moved by pressing (or holding down)
, , , or .
2.Entering Characters
(1) Entering letters and numbers
The cursor ( _ ,
or ) indicates the position to enter a character or
number. After initializing the Organizer, the default setting for entering
letters will be capital (uppercase) letters. To enter small (lowercase) letters,
turn “CAPS” off by pressing
CAPS .
(2) Entering graphic symbols and special characters
Press
SMBL to display the symbol entry mode, allowing a total of 140
symbols and characters to be selected. To select the symbol display
containing the desired symbol/special character, press
NEXT (or ) or
PREV (or ), then press the corresponding number.
• The first display is determined by your previous choice. The 10 most
recently used symbols/special characters are stored and displayed on
this display.
Press SMBL to exit the symbol entry mode.
You can also enter the following symbols/special characters by pressing
and an appropriate key (q) or directly from the numeric keys (w)
located next to the LCD display:
q &, , (, $, /, ^ , !, @, #, )
w ч, Ч, –, +, =, ±, %
• You cannot enter “ Ȉȉ ” symbol.
Display Symbols
: A “beep” will sound when a key is pressed.
: The schedule alarm will sound.
CAPS : Capital (uppercase) letters will be entered. To enter small
(lowercase) letters, turn “CAPS” off by pressing CAPS .
EDIT : The listing on the display can be edited.
2nd : Indicates that 2nd has been pressed.
: More information exists above the current display. (Press .)
: More information exists below the current display. (Press .)
S : Secret function is in effect. (Secret listings cannot be recalled
without a password.)
: Indicates that the recalled listing is secret.
BATT : Indicates that the operating battery level is low.
• In the display examples of this manual, only the symbols necessary for
explanation will be shown.
NOTES:
• The symbol “ ” shown by setting the LCD contrast to DARK is not
used in this product.
• The “ ” mark indicates the alarm sound for the scheduled listings is
turned on.
YO-520 (E0365E)
YO-520 p01~09,E.E65 5/31/2000, 11:56 AM 4