Samsung CL-21M40MQ - Manual (Page 15)

English - 15
I
N S TA L L AT I O N
2
Connect an audio cable
between the
AUDIO OUTPUT jack on
the camcorder and the
AUDIO terminals on the
side of the TV.
3
Connect a video cable
between the
VIDEO OUTPUT jack on
the camcorder and the
VIDEO terminal on the
side of the TV.
1
Locate the A/V output
jacks on the camcorder.
They are usually found on
the side or back of the
camcorder.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow
you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or
Camcorder Tape” on page 28.)
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV
may be different.
Camcorder
Output Jacks
Camcorder
Output Jacks
Audio Cable
Video Cable
Y-Connector
TV Side Panel
Camcorder
Output Jacks
TV Side Panel
AA68-03810A-Eng_Latin 8/18/06 10:14 AM Page 15