Samsung MM-J5S - Manual (Page 9)

Switch the system on by pressing Standby/On ( ) .
Select the TAPE function by pressing TAPE on the front panel.
Open the cassette deck by pushing on the corner of the cover marked
PUSH EJECT until you hear a click and then release it.
Insert the pre-recorded cassette with the open edge of the tape facing
downwards.
Close the deck by pushing on it until it clicks into place.
Press the TAPE( ) button.
Result: The cassette starts playing.
Press TAPE SPEED to adjust the speed of the tape playing.And
each time the button is pressed,the mode changes as follows.
When the cassette is stopped, select one of the following functions as
required.
To... Press...
Rewind the cassette................... /
Fast-forward the cassette........... /
The cassette player stops automatically when the beginning or end of
the cassette is reached.
To stop the playback or search, press STOP ( ) button.
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time,you must start again.
Switch the system on by pressing Standby/On ( ).
Press Timer/Clock until TIMER is displayed.
Press PROGRAM/SET.
Result:ON TIME is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
Set the timer switch-on time.
a Set the hour by pressing and .
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing and .
d Press PROGRAM/SET.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
Set the timer switch-off time.
a Set the hour by pressing and .
b Press PROGRAM/SET.
Result: The minutes flash.
c Set the minutes by pressing and .
d Press PROGRAM/SET.
Result: VOL 10 is displayed, where 10 corresponds to the volume already
set.
Press and to adjust the volume level and press
PROGRAM/SET.
Result:The source to be selected is displayed.
Press and to select the source to be played when the system
switches on.
If you select... You must also...
TAPE (cassette) ........................ • Insert a recorded cassette in the deck.
TUNER (radio) .......................... • Select the FM or AM (MW/LW) frequency
band by pressing
and .
• Press PROGRAM/SET.
• Select a preset station by pressing
and
CD (compact disc).......................Load a compact disc.
Press PROGRAM/SET to confirm the timer.
Press Standby/On to set the system to standby mode.
Result: is displayed on the top right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
You can use / button on the front panel instead of
/ button on the remote control in step 4,5,6,7.
After having set the timer, it will start automatically as shown by
the timer indication on the display. If you no longer wish to use
the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To... Press TIMER ON/OFF...
Cancel the timer........................... Once.
Result: is no longer displayed.
Restart the timer.......................... Twice.
Result: is displayed again.
Timer Function
Cancelling the Timer
1
3
4
5
6
7
8
2
CD
TA P E
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
REPEAT
TUNING
MODE
VOLUME TUNING
MUTE
+10
POWER SOUND DISPLAY PTY RDS
9
1,9 2
3,4,5,6,7,8
4,5,6,7
4,5,6,7
TUNER
BAND
MO/ST
TIMER/CLOCK TIMER ON/OFF
AUX PROGRAM/SET REP. A B
SLEEP EQ/S.BASS TAPE SPEED
MUTE
POWER SOUND DISPLAY PTY RDS
GB
You can record a radio program of your choice.
You do not need to adjust the volume, as it has no effect on
the recording.
Switch the system on by pressing Standby/On ( ) .
Insert a blank cassette in Deck.
Select the TUNER function by pressing TUNER/BAND.
Select the radio station that you wish to record by pressing
or button on the front panel or / on the remote
control .
Press REC/PAUSE.
Result:
REC is displayed and recording starts.
To stop recording, press STOP ( )button.
1
2
3
4
5
6
Recording a Radio Program
1
1
4
6
4
4
6
4
4
5
5
16
Listening to a Cassette
The direct recording mode enables you to start recording with
any track on the compact disc.
You do not need to adjust the volume, as it has no effect on the recording.
Switch your system on by pressing Standby/On ( ) .
Insert a blank cassette in Deck.
Load a compact disc.
Press the CD( ) button.
Use the CD selection ( , ) buttons to select the desired song.
Press the REC/PAUSE button.
Result: Recording will begin.
To stop recording, press STOP ( )button.
1
2
3
4
5
6
Direct recording
1
2
3
4
5
6
7
8
Recording a Compact Disc
-10%SPEED +10%SPEED NORMAL
9
GB
17
3
3,5
1
8 8
7
2,6
9
MM-J5-RDS(GB) 9/15/04 19:18 Page 16