Sharp R520_CJ16_MM_111009_F4 - Manual (Page 89)

Camera-Camcorder 86
Camcorder Settings
Memory
1. In camcorder mode, press the Options soft key, then
highlight ( ) and select Memory. The following storage
options appear in the display:
• Phone Memory — Stores videos in phone memory.
• Card Memory — Stores videos on an optional microSD Memory
Card.
2. Select the memory location setting of your choice. You’re
returned to the Camcorder viewfinder screen.
Icon Display
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
1. In camcorder mode, press the Options soft key, then
highlight ( ) and select Icon Display. The following
options appear in the display:
• Display All — All Camcorder display icons appear in the
Camcorder viewfinder screen.
• No Icons — Removes the Camcorder display icons (if displayed)
from the Camcorder viewfinder screen.
2. Select the desired Icon Display setting. You’re returned to
the camcorder viewfinder screen.
Start Sound
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
1. In camcorder mode, press the Options soft key, then
highlight ( ) and select Start Sound. The following Start
Sound options appear in the display:
• Off
• Beep
2. Select the desired start sound. You’re returned to the
camcorder viewfinder screen.
End Sound
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.