Understanding display messages, 57 understanding display messages, Understanding display – Samsung CLX-3175FW User Manual

Page 154: Understanding display messages" on, Understanding

Advertising
background image

57 _Troubleshooting

UNDERSTANDING DISPLAY MESSAGES

Messages appear on the control panel display to indicate the machine’s

status or errors. Refer to the tables below to understand the messages’

meaning and correct the problem if necessary. Messages and their

meanings are listed in alphabetical order.

If the message is not in the table, cycle the power and try the job

again. If the problem persists, call for service.

When you call for service, it is very convenient to provide the

service representative with the contents of display message.

xxx indicates the media type.

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

ADC Not

Confirm Error

A problem has

occurred in the ADC

in the machine.

Turn the power switch

off and on. If the problem

persists, call for service.

[COMM. Error]

The machine has a

communication

problem.

Ask the sender to try

again.

Connection Error

Connection with the

SMTP server failed.

Check the server

settings and the network

cable.

Data Read Fail

Check USB Mem.

Time expired while

reading data.

Try again.

Data Write Fail

Check USB Mem.

Storing to the USB

memory failed.

Check the available USB

memory space.

Deve Home Sensor

Error

There is a problem in

the fuser unit.

Turn the power switch

off and on. If the problem

persists, call for service.

Door Open

The front cover or rear

cover is not securely

latched.

Close the cover until it

locks into place.

Enter Again

You entered an

unavailable item.

Enter the correct item

again.

File Format

Not Supported

The selected file

format is not

supported.

Use the correct file

format.

Install

Imaging Unit

The imaging unit is

not installed.

Install the imaging unit.

Install Toner

T

The toner cartridge is

not installed.

Install the toner

cartridge.

Invalid Toner

T

The toner cartridge

you have installed is

not for your machine.

Install the a Samsung-

genuine toner cartridge

designed for your

machine.

IP Conflict

The network IP

address you have set

is being used by

someone else.

Check the IP address

and reset it if necessary.

(See "Setting up the

network (CLX-3175N

only)" on page 26.)

Low Heat Error

Cycle Power

There is a problem in

the fuser unit.

Turn the power switch

off and on. If the problem

persists, call for service.

LSU Motor Error

Cycle Power

A problem has

occurred in the LSU

(Laser Scanning Unit.)

Turn the power switch

off and on. If the problem

persists, call for service.

LSU Hsync Error

Cycle Power

A problem has

occurred in the LSU

(Laser Scanning Unit.)

Turn the power switch

off and on. If the problem

persists, call for service.

Main Motor

Locked

There is a problem in

the main motor.

Open and then close the

front cover.

Network Error

There is a problem

with the network.

Contact your network

administrator.

NonSAMSUNG

Toner

T

The toner cartridge

which the arrow

indicates is not a

Samsung-genuine

cartridge.

Press OK to toggle

the message to Stop

or Continue.

W Stop X

You can select either

Stop or Continue with

the left/right arrow.

If you select Stop by

pressing OK on the

control panel, the

machine stops printing.

If you select Continue,

the machine keeps

printing, but the quality

cannot be guaranteed.

If you do not select any,

the machine will work as

Stop is selected.

Replace the

corresponding toner

cartridge with a

Samsung-genuine

cartridge. (See

"Replacing the toner

cartridge" on page 50.)

Open Heat Error

Cycle Power

There is a problem in

the fuser unit.

Turn the power switch

off and on. If the problem

persists, call for service.

Operation

Not Assigned

You are in the Add

Page/Cancel Job

operation, but there

are no jobs stored.

Check the display to see

if there are any

scheduled jobs.

Out-Bin Full

The output tray of the

machine is full of

paper.

Remove paper.

Over Heat Error

Cycle Power

There is a problem in

the fuser unit.

Turn the power switch

off and on. If the problem

persists, call for service.

Paper Jam 0

Open/Close Door

Paper has jammed in

the feeding area of the

tray.

Clear the jam. (See "In

the tray 1" on page 54.)

Paper Jam 1

Check Inside

Paper has jammed in

the paper exit area.

Clear the jam. (See "In

the fuser unit area" on

page 54.)

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

Advertising