Samsung CLX-3175FW User Manual

Page 32

Advertising
background image

32 _Getting started

WPA-PSK or WPA2-PSK: You can select WPA-PSK or WPA2-PSK
to authenticate the print server based on WPA Pre-Shared Key. This
uses a shared secret key (generally called Pre Shared Key
passphrase) which is manually configured on the access point and
each of its clients.

a. Press OK when WPA-PSK or WPA2-PSK appears on the bottom

line of the display.

b. Press the left/right arrow to select TKIP or AES in Encryption and

press OK. If you select WPA2-PSK, press the left/right arrow to
select AES or TKIP + AES in Encryption and press OK.

c. Enter the WPA Key using number keypad and press OK.

5. When you have finished, press Stop/Clear to return to the ready

mode. If you do not know about your wireless environment, please
ask the network administrator.

Now go to Installing the driver software.

Using SyncThru™ Web Service

Before starting wireless parameter configuration, make sure cable
connection status.

Configuring the printer’s wireless network

1. Start a web browser such as Internet Explorer, Safari or Firefox and

enter your machine’s new IP address in the browser window.
For example,

2. When the SyncThru Web Service window opens, click Network

Settings.

3. Click Wireless and Select Wizard. Then, click Next.

4. Select the one Network Name(SSID) in the list.

SSID: SSID(Service Set Identifier) is a name that identifies a wireless
network. Access points and wireless devices attempting to connect
to a specific wireless network must use the same SSID. The SSID is
case-sensitive.

Operation Mode: Operation Mode refers to the type of wireless
connections.
- Ad-hoc: allows wireless devices to communicate directly with each
other in a peer-to-peer environment.
- Infrastructure: allows wireless devices to communicate with each
other through an access point.

5. Click Next.

If wireless security setting window appears, enter the registered
password (network key) and click Next.

6. Wizard Setup Confirmation window appears, please check your

wireless setup. If the setup is right, click Apply.

Wizard will help you setup the wireless network configuration.
However, if you want to set the wireless network directly, select
Custom.

If your network’s operation mode is Infrastructure, select the SSID
of the access point. If the operation mode is Ad-hoc, select the
machine’s SSID. Note that “airportthru” is the default SSID of your
machine.

Advertising