Samsung SCX-4600 Series - Manual (Page 107)

Supplies and accessories_ 107
15.
supplies and accessories
This chapter provides information on purchasing supplies, accessories and maintenance parts available for your machine.
This chapter includes:
• How to purchase
• Available supplies
• Available maintenance parts
• Replacing the toner cartridge
• Checking replaceable’s lifespan
Available accessories may differ from country to country. Contact your
sales representatives to obtain the list of available accessories.
HOW TO PURCHASE
To order Samsung-authorized supplies, accessories and, maintenance
parts, contact your local Samsung dealer or the retailer where you
purchased your machine. You can also visit www.samsung.com/supplies,
select your country/region, and obtain information on calling for service.
AVAILABLE SUPPLIES
• 105 (MLT-D105S)
• Region A b : 1052
b.Region A: Albania, Austria, Belgium, Bosnia, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Italy, Macedonia, Netherlands, Norway, Poland, Portugal,
Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, UK.
(MLT-D1052S)
• Region B c : 1053
c. Region B: China and India.
• 105L (MLT-D105L)
• Region A b : 1052L
(MLT-D1052L)
• Region B c : 1053L
(MLT-D1053L)
(MLT-D1053S)
When supplies reach their lifespan, you can order the following types of
supplies for your machine:
To replace a toner cartridge see "Replacing the toner cartridge" on
page 107.
Depending on the options and job mode used, the toner cartridge’s
lifespan may differ.
You must purchase supplies, including toner cartridges, in the same
country where you purchased your machine. Otherwise, supplies will
be incompatible with your machine since the system configuration of
these vary from country to country.
Samsung does not recommend using non-genuine Samsung toner
cartridge such as refilled or remanufactured. Samsung cannot
guarantee non-genuine Samsung toner cartridge's quality. Service or
repair required as a result of using non-genuine Samsung toner
cartridges will not be covered under the machine warranty.
AVAILABLE MAINTENANCE PARTS
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your machine in top working condition, the following parts
will need to be replaced after printing the specified number of pages or
when the life span of each item has expired.
To purchase maintenance parts, contact the source where you bought the
machine.
Replacing maintenance parts can be performed only by an authorized
service provider, dealer, or the retailer where you bought the machine. The
warranty does not cover the replacement of any maintenance parts after
their lifespan.
REPLACING THE TONER CARTRIDGE
Click this link to open an animation about replacing a toner cartridge.
When a toner cartridge has reached its estimated cartridge life:
• End of life Replace new cart appears on the display.
• The machine stops printing. Incoming faxes are saved in memory.
At this stage, the toner cartridge needs to be replaced. Check the type of the
toner cartridge for your machine (See "Available supplies" on page 107).
TYPE AVERAGE YIELD a
a.Declared yield value in accordance with ISO/IEC 19752.
PART NAME
Standard yield Approx. 1,500 pages
High yield Approx. 2,500 pages
PARTS AVERAGE YIELD a
a.It will be affected by operating system used, computing performance,
application software, connecting method, media type, media size and
job complexity.
PART NAME
Document feeder
rubber pad
Approx. 20,000 pages RMO ADF
RUBBER
Transfer roller Approx. 50,000 pages ROLLER-TRANSF
ER
Fuser unit Approx. 50,000 pages FUSER
Pickup roller Approx. 50,000 pages ROLLER-PICK UP
Cassette unit Approx. 50,000 pages CASSETTE