Sharp XG-C430X - Manual (Page 38)

-36
Displaying and Setting the
Break Timer
This function allows you to show the remaining
time for break during meeting.
1
Press BREAK TIMER. The break
timer starts to count down from 5
minutes.
2
When “ ” is displayed, press '
' ' ' ' ,
" " " " " , \ \ \ \ \ or | | | | | to set the break timer.
• You can set anywhere between 1 and 60
minutes (in 1 minute units).
3
Press BREAK TIMER to cancel
the break timer.
MOUSE/Adjustment
buttons ('/"/\/|)
PICTURE MODE
button
BREAK TIMER
button
RETURN button
ECO/QUIET button
"On-screen Display
Switching the Eco/Quiet
Mode
Press ECO/QUIET on the remote control or ECO/
QUIET on the projector to switch the Eco/Quiet mode
between on and off.
• When the Eco/Quiet Mode is set to “On”, the sound
of the cooling fan will turn down, the power con-
sumption will decrease, and the lamp life will ex-
tend. (Projection brightness decreases 20%.)
Selecting the Picture Mode
You can select the suitable picture mode for the
projected image, such as movie or video game.
Press PICTURE MODE on the remote
control.
• When pressing PICTURE MODE, the picture
mode changes in order of:
Note
• “sRGB” is displayed only when RGB signal is
input.
• Press RETURN to return to the “STANDARD”
mode while “Picture Mode” is displayed on the
screen.
STANDARD PRESENTATION MOVIE GAME sRGB
Brightness
80%
100%
On
Off
Power consumption
(When using AC 100V)
300 W
360 W
Lamp life
Approx.
3,000 hours
Approx.
2,000 hours
Image Projection