Sharp XG-C430X - Manual (Page 55)

-53
Useful Features
Menu operation Page 42
9 9 9 9 9 DHCP Client Setting
Connect the LAN cable before turning the pro-
jector on. If not, the DHCP Client function does
not work.
Select “On” for “DHCP Client”, then press ENTER .
“Obtaining IP Address...” appears, then the menu
screen appears. Confirm the parameters of IP
Address, Subnet Mask and Gateway on the TCP/IP
screen.
If the DHCP server is not available, “Could not
obtain IP Address.” appears.
In this case, set the TCP/IP manually. (See the
item 0.)
Selectable items
On
Off
Description
Obtains configuration parameters for
TCP/IP network automatically.
Sets the TCP/IP manually.
0 0 0 0 0 TCP/IP Setting
Set the TCP/IP manually.
1
Select “Off” for “DHCP Client”, then
press
ENTER.
2
Select “TCP/IP”, then press ENTER.
3
Enter “IP Address” using '
' ' ' ', " " " " ", | | | | |
and \, then press ENTER.
4
Enter “Subnet Mask” using '
' ' ' ', " " " " ",
| | | | | and \, then press ENTER.
5
Enter “Gateway” using '
' ' ' ', " " " " ", | | | | | and
\, then press ENTER.
Selectable items
IP Address
Subnet Mask
Gateway
Description
Factory default setting:
192.168.150.002
Enter an IP address appropriate for the
network.
Factory default setting:
255.255.255.000
Set the subnet mask to the same as
that of the computer and equipment on
the network.
Factory default setting:
000. 000. 000. 000
* When not in use, set to:
“000. 000. 000. 000”.
Note
• Confirm the existing network’s segment (IP ad-
dress group) to avoid setting an IP address that
duplicates the IP addresses of other network
equipment or computers. If “192.168.150.002”
is not used in a network with an IP address of
“192.168.150.XXX”, you don’t have to change
the projector IP address.
• For details about each setting, consult your
network administrator.