Specifications, Appendix – Sharp XG-C430X User Manual

Page 69

Advertising
background image

-67

Appendix

Specifications

LCD Projector
XG-C430X/XG-C335X/XG-C330X
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I
LCD panel × 3, RGB optical shutter method
Panel size: 0.8"
No. of dots: 786,432 dots (1,024 [H] × 768 [V])
1.2 × zoom lens, F1.7–1.9, f = 28.0–33.6 mm
275 W AC lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P

B

: 0.7 Vp-p, 75 Ω terminated

P

R

: 0.7 Vp-p, 75 Ω terminated

700 TV lines (DTV720P)
15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
DVI connector (24-pin), RGB (digital), 250 –1,000 mV, 50 Ω (Compatible with HDCP)
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
ø3.5 mm minijack, RCA terminal
0.5 Vrms, more than 22 kΩ (stereo)
ø3.5 mm minijack
0.5 Vrms, less than 2.2 kΩ (stereo)
4-pin B-type USB female connector
9-pin mini DIN connector
8-pin RJ-45 modular connector
12–108 MHz
43–85 Hz
15–70 kHz
2.0 W (monaural)
3.6 cm round × 1
AC 100–240 V
3.6 A
50/60 Hz
360 W (Eco/Quiet Mode “Off”)/300 W (Eco/Quiet Mode “On”) with AC 100 V
345 W (Eco/Quiet Mode “Off”)/285 W (Eco/Quiet Mode “On”) with AC 240 V
6 W (AC 100 V) – 8 W (AC 240 V) (LAN/RS232C Disable)
1,350 BTU/hour (Eco/Quiet Mode “Off”)/1,125 BTU/hour (Eco/Quiet Mode “On”) with AC 100 V
1,295 BTU/hour (Eco/Quiet Mode “Off”)/1,070 BTU/hour (Eco/Quiet Mode “On”) with AC 240 V
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
12

27

/

32

" Ч 4" Ч 11

1

/

64

" (326 (W) × 101.5 (H) × 279.5 (D) mm) (main body only)

12

15

/

16

" Ч 4

63

/

64

" Ч 11

1

/

2

" (328.5 (W) × 126.5 (H) × 292 (D) mm) (including adjustment foot

and projecting parts)
10.8 lbs. (4.9 kg)
Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,
Power cord for U.K., Hong Kong and Singapore, Power cord for Australia, New Zealand and
Oceania, RGB cable, DIN-D-Sub RS-232C adaptor, Storage case, Lens cap, Lens cap strap,
Projector manual and technical reference CD-ROM, Operation manual

Product type

Model

Video system

Display method

LCD panel

Lens

Projection lamp

Component input

(COMPUTER/COMPONENT 1, 2)/

output (MONITOR OUT) signal

Horizontal resolution

Computer RGB input

(COMPUTER/COMPONENT 1, 2)/

output (MONITOR OUT) signal

RGB digital input signal (DVI-D)

Video input signal

S-video input signal

Audio input signal

Audio output signal

USB terminal

RS-232C terminal

LAN terminal

Pixel clock

Vertical frequency

Horizontal frequency

Audio output

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.

Advertising
This manual is related to the following products: