Samsung digital SC-D363 - Manual (Page 49)

ENGLISH
45 45
✤ The WindCut Plus function works in both <Camera> and <Player> (Audio dubbing) modes. ➥page 19
✤ Use the WindCut Plus when recording in windy places such as the beach or near buildings.
✤ The WindCut Plus function minimizes wind or other noises while recording.
- When the WindCut Plus is on, some low pitched tones are eliminated along with the sound of the wind.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE]. (SC-D363/D364/D365/D366 only)
3. Press the [MENU] button.
4. Move the [Zoom] lever up or down to select <Record>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <WindCut Plus>, then press the [OK]
button.
6. To activate the WindCut Plus function, move the [Zoom] lever up or down to select <On>
or <Auto> then press the [OK] button.
■ <On>: Removes the low pitched wind noise.
■ <Auto>: Minimizes the wind noise while preserving voices.
7. To exit, press the [MENU] button.
■ WindCut Plus (<On> or <Auto> ) icon is displayed.
[ Notes ]
■ Make sure WindCut Plus is set to off when you want the microphone to be as sensitive
as possible.
■ WindCut Plus function is not available in USB Streaming mode.
(SC-D362/D363/D364/D365/D366 only)
Advanced Recording
Cutting Off Wind Noise (WindCut Plus)
Move Select Exit MENU OK ZOOM
Camera Mode
√Record
Rec Mode
Audio Mode
WindCut Plus
Real Stereo √SP
√12Bit
√Off
√Off
Move Select Exit MENU OK ZOOM
Off
On
Auto
4
6
60min
0:00:10 SP STBY
7
œ
Camera Mode
Back
Rec Mode
Audio Mode
WindCut Plus
Real Stereo