Satellite receiver – Sony KLV-40U100M User Manual

Page 18

Advertising
background image

Connecting the Unit

18

KLV-32U100M

2-668-009-13(1)

G:\#Sagyo\SONY\09 TV\kaihan KLV-
32U100M\1219_KLV32U100M_rev\2668009131\2668009131 KLV-
32U100M_US\01US04INS.fm

masterpage:3 columns Right

Satellite Receiver

This scenario shows a SAT Box connected through the video inputs. Satellite
signals are selected by the SAT Box through the video inputs.

To connect a satellite receiver

1

Connect the satellite antenna cable to the satellite receiver’s satellite
input jack.

2

Use an A/V and S VIDEO cables to connect the satellite receiver’s
AUDIO and S VIDEO output jacks to the unit’s AUDIO and S VIDEO
input jacks (VIDEO 1 or 2).

Notes on Using This Connection

If your satellite receiver is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO cable.

z

If you connect the Digital
Satellite Receiver with
component video cables,
see page 20.

VIDEO IN

1

VIDEO

AUDIO

L

R

(MONO)

S VIDEO

Rear of unit

A/V cable

Satellite Receiver

Satellite
antenna
cable

S VIDEO cable

S VIDEO

VIDEO
(yellow)

AUDIO-L
(white)
AUDIO-R
(red)

To Do This ...

Do This ...

Watch the satellite receiver

Press

V1

or

V2

on the remote control.

or

Press

INPUT

on the top panel

repeatedly to select the satellite receiver input (Video

1 or 2).

Label video inputs to easily
identify equipment connected to
the unit

See the instructions for setting up

Label Video Inputs

on page 40.

01US02WAR-UC.book Page 18 Monday, December 19, 2005 1:58 PM

Advertising
This manual is related to the following products: