Speaker installation – Samsung HT-THQ25 User Manual

Page 8

Advertising
background image

GB

14

13

CONNECTIONS

Speaker Installation

How to install the speaker and the stand (Tallboy type)

How to install the speaker and the stand (Half tallboy type)

2

3

4

5

6

1

Turn the STAND (B) upside-down
and connect it to the STAND
BASE (C).

Turning the screw (D) clockwise,
connect it to two holes marked
with the arrow using a screwdriver
as shown in the ullustration.

Turning the supplied screw (E)
clockwise, connect it to a hole on
the rear of the Speaker.

Connect the assembled stand to
the SPEAKER (A).

Turning the screw (E) clockwise,
connect to a hole on the rear of
the speaker using a screwdriver as
shown in the illustration.

This is the successfully assembled
speaker.

* Make sure that the TALLBOY type

speaker should be installed on the flat
and stable area. Otherwise it may fall
down due to external shock.

Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw

Component
A: SPEAKER
B: STAND
C: STAND BASE
D: Screw
E: Screw

2

3

4

1

Connect the SPEAKER (A) with
the STAND BASE (C).

Turning the screw (D) clockwise,
connect it to two holes marked
with the arrow using a screwdriver
as shown in the illustration.

Turning the screw (E) clockwise,
connect to a hole on the rear of
the speaker using a screwdriver as
shown in the illustration.

This is the successfully assembled
SPEAKER (A).

THQ22(1~40P) GB 2006.5.16 2:41 PM Page 16

Advertising
This manual is related to the following products: