Samsung YP-K5AB - Manual (Page 49)

Chapter 4. Setting
Setting Language/ Setting the System
49
Setting the System
You can set various functions of the player.
Settings
1
Press and hold [ ] to move to the main menu.
2
Tap [ ] to select <Settings> and then tap [ ].
■ The Settings menu appears.
3
Tap [ ] to select <System> and then tap [ ].
■ The System menu appears.
4
Use the [ ] and [ ] to set the desired functions
Settings
Display
Time
Language
System
■ Frequency range by region
- Other Countries: Search for FM frequencies in 50 kHz increments between 87.50 MHz~108.00 MHz.
- Korea/USA: Search for FM frequencies in 100 kHz increments between 87.5 MHz~108.0 MHz.
- Japan: Search for FM frequencies in 100 kHz increments between 76.0 MHz~108.0 MHz.
■ FM region can be deleted or changed according to the target region of the player.
■ If you change the FM region, the previously stored radio frequencies are deleted.
.
NOTE
■ <Resume>: You can set the start point where the player resumes playback after you stop
playing the music. Selecting <On> will resume playback from the last stopped point while <Off>
will resume playback from the beginning of the last played file.
■ <Beep>: Enables button sounds. Select either <Off> or <On>.
■ <Volume Limit>: You can avoid hearing damage by setting the limit of the volume when using
the earphone. <On> will limit the maximum volume level up to 20. The maximum volume level
when Volume Limit is set to <Off> is 30.
■ <FM Region>: You can select your regional area for FM radio. Select from <Other Countries>,
<Korea/USA> and <Japan>.