Monitor image section – Sony SNC-CS20 User Manual

Page 20

Advertising
background image

O

per

at

ing
t

he

Came

ra

Configuration of Main Viewer

20

Digital zoom

Click to change the size of the digital zoom. (page 22)

Capture

(Displayed in the main menu when the Java applet
viewer is used.)
Click to capture a still image shot by the camera and to
store it in the computer. (page 22)

Trigger

(Displayed only when the camera Viewer mode
(page 55) is set to Full and one or more triggers are
enabled in the Trigger menu (page 71).)

Select the function you want to use from the drop-down
list and click

. The selected function is activated.

The selectable functions are as follows:
– send the still images attached to an e-mail (page 26)
– send the still images to an FTP server (page 26)
– record the still image files in the built-in memory

(page 26)

– control the alarm output (page 26)
– switch the Day/Night function on/off (SNC-DM160 /

DS60 / CM120 / CS20 only) (page 26)

– play the audio file stored in the camera (page 27)

Control (SNC-DM110 / DM160 /

CM120 only)

(Displayed only when the SolidPTZ function is On.
(page 42))
Click to operate the camera using the pan, tilt and zoom
functions.
Click to change this icon to

, and you can operate

pan/tilt/zoom on the monitor or control panel (page 23).

Preset position (SNC-DM110 / DM160 /
CM120 only)

(Displayed only when the SolidPTZ function is On
(page 42) and preset position of the camera is
registered.)

Select the Preset position name from the drop-down
list. The camera will move to the preset display range

that you have stored in memory using the Preset position
menu.

Monitor image section

Monitor window

The image shot by the camera is shown here.

View size

Selects the view size to be displayed. (page 22)

Date and time

The date and time is displayed here.

Volume

(Displayed when Audio input (page 35) is set to On.)

Drag the

bar to adjust the volume.

When you click

the icon changes to

and the

audio output stops.
To output the audio, click

again.

Note

If

does not appear when the Java applet

viewer is used, Audio encode may not be set to G.711
(64 kbps)
(page 36), or Java may not be installed

Volume

Monitor
window

Date and time

View size

Advertising
This manual is related to the following products: