Using the snc video player – Sony SNC-CS20 User Manual

Page 86

Advertising
background image

Ot
her

s

Using the SNC video player — Playing Video/Audio File Recorded with Camera

86

Using the SNC video player

1

Start the SNC video player.

2

Click the

(browse) icon.

The Select File dialog opens.

3

Select the file you want to play.
Click

on the top of the screen, and file

information dialog appears.

File dialog
Model name:
Model name of the camera with

which the file is recorded.

IP address: IP address of the camera with which

the file is recorded.

Serial number: Serial number of the camera with

which the file is recorded.

Video: Video Codec
Audio: Audio Codec

Record event: Type of event used for the

recording: Sensor input or Motion detection.

Date&time: Recording date and time

Playing a video/audio file

Click

(start) to start playing from the beginning of

the selected file.
To freeze the movie temporarily, click

(pause).

Click

again to restart playing from the frozen point.

To stop playing, click

(stop).

To restart playing from the beginning, click

(start)

again.
Play stops when the file is played to the end.

Playing from a specified point

Move the slide bar below the image display, and
playback will start from the position of the slide bar.

Adjusting the sound

Adjust the playing sound volume by moving the

slide bar. Move it to the left end for the

minimum volume, and to the right end for the maximum
volume.
Click

(speaker) to enable/disable the sound

muting.
When sound muting is on, no sound is heard even if you
move the slide bar.

Saving an image

Click

(capture) icon during playing or pause and the

captured image is displayed in a pop-up dialog. To save
the image, click Save on the dialog. You can specify the
destination to which the image is to be stored and select
the JPEG or Bitmap format.

Changing the view size

Click Ч 1/4, Ч 1/2, Ч 1, Ч 2 to change the view size. The
monitor is displayed by the view size as you selected.
When you click × 1, the original size of image is
displayed.
× 2 is available only for 640 × 480 (VGA) size or less.
The selected view size button flips.

Advertising
This manual is related to the following products: