Sharp PG-A10X - Manual (Page 22)

-18
Connecting to Video Equipment
Connecting the Projector to Other Devices
-18
Connecting to Video
Equipment Using an
S-video, a Composite
Video or an Audio Cable
Using an S-video, video, or audio cable, a VCR,
laser disc player or other audio-visual equipment
can be connected to INPUT 2, INPUT 3 and AU-
DIO input terminals.
1
Connect the projector to the
video equipment using an S-
video cable or a composite video
cable (both commercially avail-
able).
2
Connect the projector to the
video equipment using a ø3.5
mm minijack to RCA audio cable
(commercially available).
Note
• The INPUT 2 (S-VIDEO) terminal uses a
video signal system in which the picture is
separated into color and luminance signals
to realize a higher-quality image. To view a
higher-quality image, use a commercially
available S-video cable to connect the IN-
PUT 2 terminal on the projector and the S-
video output terminal on the video equip-
ment.
• A ø3.5 mm minijack to RCA audio cable
(commercially available) is required for au-
dio input.
To S-video output terminal
To video output terminal
To audio output terminal
VCR or other audio-visual equipment
-18
1
S-video cable
(commercially available)
1
Composite video cable
(commercially available)
2
ø3.5 mm minijack to RCA audio cable
(commercially available)