Sharp UP-3300 - Manual (Page 102)

99
Manager Mode
The manager mode is used when managerial decisions must be made concerning POS terminal
entries, for example, for overriding limitations and for other various non-programming managerial
tasks.
NOTE
Normal POS terminal operations may also be performed in this mode.
Entering the Manager Mode
To enter the manager mode, select the REG mode from the mode selection menu, then use the following
procedure:
Procedure
Display
XX
Manager code
XXXX
Secret code
When “0” is programmed for the
secret code The display shown
at right will appear.
MGR # ENTER
The manager code is stored in the manager file in advance.
If the code entered is not found in this file, an error occurs.
If the code is correct, it is printed on the journal and the
POS terminal enters the manager mode.
Override Entries
Programmed limits (such as maximum amounts) for functions can be overriden by placing the POS terminal
in the manager mode.
Example
This example presumes that the POS terminal has been programmed not to allow coupon entries over 2.00.
Key Operation Display
000002
250 (–)2
CLEAR
1 MGR #
1245 ENTER
250 (–)2
CASH/TL
9
MGR MODE
REG-mode entries
To enter the
manager mode
Return to the
REG mode.
...... Error